The Soling One Meter is a low-cost, kit-based one-design class targeted toward getting new skippers and hobbyists involved in model yachting. The Soling One Meter Class philosophy is to provide a low-cost one-design model suitable for introducing newcomers to the hobby, while offering enough performance to keep long-time model sailors interested. All aspects related to performance are intended to be restricted to what can be achieved by building the kit straight from the manufacturer's plans. Other aspects not affecting performance are not as strictly controlled.
The Soling One Meter Class was introduced to the AMYA in 1993. Since that time it has become the largest class in the organization, with just over 3100 boats registered in early 2013. The Soling One Meter also qualifies in the open design US One Meter Class. Solings must be built from a kit available from a single manufacturer:
This manufacturer and others offer partially or fully assembled yachts. The hull and deck are vacuum formed styrene plastic, the spars are wood, sails are flat and unpaneled. Despite these limitations, the boat sails well, satisfying even veteran skippers with its balance and handling The Soling One Meter class is managed by the AMYA Soling One Meter Class Secretary and an appointed Class Advisory Committee. The Soling One Meter Class Rules may be downloaded from the links table on this page.
10 pounds minimum
592 sq. inches
Approx. 10 inches
Copyright The American Model Yachting Association. All Rights Reserved. P.O. Box 360374 | Melbourne, FL 32936 Phone:(888)-237-9524 | email@example.com | sitemap